The floor is one of the key elements that influence a business’s day-to-day operations and the first impression it makes on customers. Choosing the right surface—where vehicles move, equipment is used and people walk throughout the day—is important in terms of maintenance, spatial organisation and appearance.
Interlocking PVC flooring is a modular surface system comprising interlocking tiles. ARN Floor’s 7mm Heavy-Duty Interlocking Floor Tiles are flooring options suitable for areas such as garages, car service centres, workshops, showrooms and warehouses, and can be assessed according to project requirements. For the best results, the condition of the existing floor and the installation plan are just as important as the choice of product.
Flooring Is Not Just About Appearance
A vehicle parking area in a garage, a work area in a workshop and a display area in a showroom each have different requirements. The choice of flooring must meet these requirements.
The initial purchase price of the flooring alone is not a sufficient criterion for comparison. The preparation required for installation, the duration during which the area will be out of use, the cleaning method and any repairs that may be required in the future are also part of the decision-making process.
A well-planned flooring project combines the business’s operational requirements with its aesthetic expectations. When evaluating a project with ARN Floor, the size of the area, the existing surface and the nature of daily use must all be taken into account.
How Does a Modular System Contribute to Floor Renovation?
In interlocking tile systems, the floor consists of interconnected sections. This structure allows the project to be planned in sections and enables specific tiles to be addressed individually under suitable conditions.
For example, the workspace and entrance area of a workshop can be refurbished in different phases. The feasibility of such a plan depends on the installation method, the accessibility of the area and the business’s operational routine.
It is important to plan in advance how work flow will be maintained whilst the floor is being renewed. Rather than a single timeframe such as ‘same-day installation for every project’, a realistic installation schedule should be drawn up based on the size of the area, the sections involved and the preparation of the subfloor.
What Should Be Considered When Choosing Flooring for Garages and Car Service Centres?
When selecting a garage floor, vehicle traffic, the surface area in contact with tyres and cleaning requirements must be assessed. In car service centres, the use of jacks, lifts, tool trolleys and other equipment must also be taken into account.
The load created by a vehicle’s tyres is not the same as the point load created by a narrow equipment wheel or a jack foot. Therefore, selecting a product based solely on the total vehicle weight is not sufficient.
Sharing vehicle and equipment details for the ARN Floor project facilitates the identification of the appropriate solution. If contact with oil, fuel or cleaning agents is anticipated, these conditions must also be included in the technical assessment.
A More Organised Workspace with Colours
A floor organised using different colours can make the use of the space clearer. Vehicle parking areas, walkways and workstations can be visually distinguished.
The following products are presented as examples on the ARN Floor website:
- 7mm Heavy-Duty Interlocking Floor Tile – Black
- 7mm Heavy-Duty Interlocking Floor Tile, Anthracite
- 7mm Heavy-Duty Interlocking Floor Tile – Grey
- 7mm Heavy-Duty Interlocking Floor Tile – Red
The colour options are not limited to the black, anthracite, grey and red shown on the website. ARN Floor interlocking floor tiles can be produced in any colour. The desired colour, corporate identity and layout design can be determined together during the project consultation. Visual cohesion can be achieved around vehicles or products on display in showrooms.
Colour-coding should be considered in conjunction with the necessary safety signs and workplace regulations.
Why Are Edge and Corner Details Important?
It is not just the central section of the floor covering that must be planned, but also the start and end points. Exposed edges, door thresholds and transitions affect both the appearance and usability of the project.
The 7mm Heavy-Duty Interlocking Edge Ramp and 7mm Heavy-Duty Interlocking Corner Ramp options in the ARN Floor product range can be considered to complete the finishing details of the flooring in suitable installations.
The need for ramps should be determined based on the door opening, floor level and direction of passage. In this way, the tiles, edge and corner elements can be calculated together.
Maintenance and Localised Renewal
When evaluating a flooring investment, future maintenance requirements must also be taken into account. In modular flooring systems, replacing specific tiles under suitable conditions can serve as an alternative to renovating the entire surface.
In daily maintenance, it is important to remove dirt from the surface, clean up spilled liquids without delay, and select cleaning products suitable for the product. Interlocking joints do not mean the floor is waterproof; projects involving heavy liquid contact should be assessed separately.
The maintenance method should be determined according to the frequency of use of the premises and the product’s maintenance instructions.
Inspection of the Existing Floor Prior to Installation
Interlocking PVC tiles do not replace the subfloor. Large pits, loose sections and significant level differences in the subfloor must be addressed prior to installation.
The surface’s strength, evenness and moisture content must be checked; temperature fluctuations and the necessary expansion joints must be included in the installation plan.
This preparation forms the basis for ensuring the flooring is installed in a manner suitable for its intended use. The correct product and correct installation must be considered together.
Frequently Asked Questions
What is the ARN Floor interlocking floor tile?
ARN Floor’s 7mm Heavy-Duty Interlocking Floor Tile is a 50 × 50 cm interlocking PVC floor covering product. The tiles are joined together to form a modular surface.
How many tiles are required per square metre?
Four 50 × 50 cm tiles nominally cover an area of 1 m². Cuts required for the order quantity, the shape of the area and edge details must also be taken into account.
Can they be used in garages and car workshops?
It may be considered for use in these areas. Project suitability must be determined by taking into account vehicle traffic, equipment such as jacks and hoists, point loads and contact with liquids.
Can it be laid over existing concrete?
It may be considered for installation if the concrete surface is in a suitable condition. Loose sections, large potholes, dampness and level differences must be checked prior to installation.
Can a single damaged tile be replaced?
Thanks to its modular design, specific tiles can be replaced under suitable conditions. The method of intervention depends on the installation pattern and the accessibility of the relevant section.
What is the purpose of edge and corner ramps?
They are used to finish the tile covering at appropriate entry and exit points. The necessary components must be selected according to the area’s dimensions, level and transition layout.
Can it be used in outdoor areas exposed to direct sunlight?
Outdoor use in direct sunlight is not recommended. For semi-open or heavily sun-exposed areas, a suitability assessment should be carried out with ARN Floor prior to installation.
Are ARN Floor products only available in the colours shown on the website?
No. ARN Floor interlocking paving slabs can be produced in all colours. The black, anthracite, grey and red products shown on the website are examples of the available options. The requested colour and production details are clarified prior to ordering.
How can I find out how much product I need for my project?
You can use the m² calculation tool on the ARN Floor website, entering the width and length measurements of the area. The layout plan must also be assessed for any cuts and ramp requirements.
Plan Your Flooring Project with ARN Floor
Choosing a floor covering begins with understanding how the space will be used. You can clarify your project’s requirements by sharing the dimensions of your garage, car service centre, showroom or workshop, along with photographs of the existing floor and details of any vehicles or equipment.
Browse ARN Floor products, calculate the square metres of your space and request a quote for flooring options suitable for your use.
